Remove Glue From the Surface of PVC Pipe

Remove Glue From the Surface of PVC Pipe
Remove Glue From the Surface of PVC Pipe

PVC  pipes are the most secure and comfortable fitting material used at commercial and industrial locations. To make the pipe fitting connection perfect we need a primer and glue. These pipes are secured by a specific solvent glue material specifically available for plumbing work. 

When we apply this solvent glue on pipe surfaces, a dissolution process happens to melt the pipe surfaces to form a rigid connection. In the market different types of solvents are available but the violet color is preferred by most of the people. Sometimes when it does not apply properly and you need to remove this glue from the pipe it becomes a completely tough job. 

Here, you can learn how you can remove this glue smoothly without affecting the entire system. PVC glue is a significant material available in three main variants, white glue, wood glue, hot melt glue fulfill different needs. It quickly gets stuck to the pipe areas and rigid in a short period.

It is a specific type of solution used to strengthen the grip of two pipes and joint them intensely. The glue affects the first surface layer of the pipe, smoothen it, and particles get dissolved. At this time when you will try to join the other pipe to it, the pipe will make an attachment. The two points joined together may be stronger than usual.

If you think the connection is not correct, detachment of pipes is easier. If you have just connected the pipes and the pipes are not gripped strongly, you can detach them. There are so many pipe manufacturer in India to provide the best PVC pipe and PVC fittings products at affordable rates, KPT pipes in Delhi is famous for their high-efficient easily accessible products and services.

Method to remove the glue from pipe joint

If you have the right tools used at PVC fitting PPR implementation areas, and you do have knowledge and skills, removing the glue will be easier for you. If you have not the one you need to take the professional help. It will be more comfortable and secure.

To remove the joint, you will need to use tools or equipment. Heat gun, tongue and groove pliers, hacksaw or any kind of pipe cutter, sandpaper, gloves made of thick material, etc.

Usually, the PVC pipe manufacturer follows the following methods to remove glue and pipe surfaces without impacting the product and entire water supply system.

The different method to detach PVC pipe

  • The simplest way to remove the connection is to cut down it from another point. You just need to use a cutter or hacksaw. It won’t take much time to break the connection of two PVC pipes. You should be aware that you will again join the pipes so leave sufficient space to attach PVC coupling, elbow, reducer, or threaded fitting PPR material.
  • Two tongue groove pliers are used in this method to break the connection. You need to apply pressure in different directions to rotate the pipe. 
  • You can break the joint by taking the pipe into contact with heat. A chemical exclusion will be visible in this practice. The heat will be produced by a heat gun specifically designed to smoothen the pipe joint, extracting unnecessary paint, etc.

Turn on the setting of the heat gun, when it starts producing heat into the PVC pipe and it smoothens the grip of the joint, you can use pliers to detach the connection. You need to be patient during this process if you will try to rush you may have to bring a new pipe perhaps a pipe collapse.

Note: If you don’t want to increase your expenses, always hire a professional, we know he will charge for the services but you will get the proper fitting shortly.

Additional way to remove PVC glue

PVC glue is of violet color, comes in a liquid form that does not blend easily. The PVC glue will be pulled out from the pipe surface. Once the purple color is removed, the glue will get resolved and the connection will break down. In this process, the PVC will not get affected, Avoid grooves using sandpaper. Check more ppr pipe price list India. Use the sandpaper carefully and do not rugged it too much on the pipe so you can reuse the pipe.