Press "Enter" to skip to content

How to Install Faux Rock Sidings

Faux Rock SidingsRecently there has been a lot of advancement in the field of construction and a lot of new and different kinds of synthetic materials of constructions have been discovered and introduced in the market. Among these various kinds of construction materials, faux rock is the one which is most commonly used nowadays especially for the purpose of installation as siding on the walls. Faux rock is basically a synthetic stone but it gives the appearance of natural stone and when it is installed on the walls it adds further to the beauty and aesthetic value of the house. Another great feature of the faux rock is that you do not need to spend heavy expenses on the hiring of professional masons and contractors. By installing the faux rock by yourself you will not only be able to save money but also improve the aesthetic as well as the commercial value of your property and hence it will benefit you two folds.

Although there is no need for anyone else to complete the project of faux rock installation if you feel the need for assistance from someone, you can call a friend on weekend to help you out in the accomplishment of this task. In order to carry out the project of faux rock installation, you have to follow certain instructions and keep in mind certain tips.

Step 1: Taking measurements of the whole area:

The first step in the project of faux rock installation is making accurate measurements of the whole area of the wall where the faux rock is needed to be installed. First, you have to measure the area of the wall and then you can take these measurements to the home improvement center. The experts over there can give you an estimate of the things you will need for the installation of the faux rock.

Step 2: Preparation of wall for faux rock installation:

The next step is to prepare the wall for the purpose of installation of the faux rock. For this purpose, you have to first strip off the old siding on the wall and also remove the old sheathing which makes the base of the old siding. After that, the next step is installing the vapor barrier on the wall. After installation of the vapor barrier, you have to make sure that it covers all the edges up to at least 4 inches. Asphalt paper can serve as an excellent source of the vapor barrier. The vapor barrier handles the shingles well and it can also be directly fixed to the sheathing as well.

Step 3: Chicken wire installation:

The very next step is the installation of the chicken wire also known as the wire lath on the wall. This is installed over the vapor barrier and the asphalt paper sheathing. In order to install the chicken wire, you have to use the galvanized screws because these screws resist corrosion very effectively.  The chicken wire is installed partially on the screws and then the screws are completely fixed over the sheet of chicken wire.

Step 4: Mixing of mortar for faux rock installation:

After the chicken ire is installed, the mortar is mixed well. The application of mortar is done by means of a trowel. It is advised to spread the thin layer of mortar over the surface of the wall over which the faux rock can be fixed.

Step 5: Application of faux rocks:

After the mortar is applied to the thickness of about an inch, the faux rock is applied and it is fixed in the form of panels. After placing the panels in a position it is necessary to press them a little so that these are fixed firmly on the wall.

The task of installation of faux rock is not difficult. It only requires a little perfection along with the detailed work and assistance by some expert siding contractors in Michigan.