Aluminum siding is considered to be the best siding because of its capabilities. You can make the corners of the aluminum siding smooth and silky by a simple method. If your aluminum siding went old then you can make it better by making its corner smooth and sharp. You should use the aluminum coil stock to apply on the corners of the siding. You can make your siding corners smooth by cutting the corner neatly. For this, you should need to do the following work for the smooth aluminum siding corner.
The right way to make a smooth aluminum siding corner:
- Create a figure:
While working on the corners of the aluminum siding, firstly, you should need to make a figure of the corners of the siding. Also, you must make sure to draw the exact dimensions of the corner of the siding. You must use the original tools and equipment to cut the aluminum siding corners well enough. If you should use any other metallic object which is not certified for cutting the sidings then it may waste your siding lengths.
- Cut the lengths of the corner:
After figuring the corners of the aluminum siding then you need to cut the rough lengths of the corner of the siding from the aluminum coil stock. Then you can also trace the cutting at the outline and cut the siding nicely at the perfect size on the flat sheet of the metal. You should need to use the perfect cutting equipment for the cutting which is tin snips. You should also need to make extra pieces of the corners in case of any wrong work done.
- Bend the pieces in the correct order:
You should need to bend the pieces of the siding in the correct order. For this, you need to first mark the center of the corner siding then take a scrap wood and place at the center line where you have to mark the point. Then bend the pieces of the siding with your hand. You should also keep your hands safe by wearing the gloves on it. When you are bending the pieces you must bend it at the right angle of 90 degrees.
- Make the second bend from the inner side:
After bending the siding piece from the outer side of the piece then you should need to bend the inner side or the smaller side of the pieces. You should also bend this side to the 90 degrees of angle to make it perfect. You also keep in mind that you only bend one side of the piece. The other side of the piece must remain open to install it properly.
- Finishing touch:
After applying the pieces on the corners of the siding then you should need to give the final touch by nail it. You should also need to paint the pieces of the aluminum and match it with the surrounding of the siding.
From the above, we concluded that the corners of the aluminum siding can be made smooth and sharp but you should need to do the work with great presence of mind because you should need to cut the angles and dimensions at the accurate place. You should also bend it at the 90-degree angle and then paint the whole area of the pieces to look it nicely. If you are facing problems while smoothing aluminum siding then you really need to contact professional Siding contractors Ann Arbor in Michigan for assistance.