Press "Enter" to skip to content

How to Connect Your Wifi Router with Manual Setup

Netgear smart signal booster (extender) helps you to perk up the strength or the range of your existing WiFi signals throughout the home. Simply go through with Netgear extender setup process and enjoy uninterrupted internet everywhere in your house even at blind zones and dead spots also.

On the other hand, plays an important role in setting, configuring, and installing up the smart Netgear wireless repeater (extender). When you connect your Netgear device and pull up a web browser, it will take you automatically to setup page.

Setup your Netgear Smart Wireless Range Extender Manually

If you own a Netgear range expander (extender) that has an Ethernet port, for example, EX6100 then

  • Use a computer or laptop to connect to your Netgear device physically via Ethernet cable.
  • Using mywifiext, log in to the web user interface of your range extender.
  • After that, you will be prompted to enter a username and password (default).
  • As soon as you are successfully logged in, go to Setup and then Wireless Settings.
  • Next, check the value in the password (network key or passphrase) field under the “security options”.
  • You have to keep this in mind – if the network key (password) is different with your main your router password then consider changing it so that it matches perfectly.
  • Once done, click on Apply and at last, reconnect your WiFi-enabled smart devices to the Netgear WiFi booster (extender).

If you own a Netgear wireless range extender that is without an Ethernet port, for example, WN1000RP, then:

  • Reset your device back to factory default values.
  • For this, you have to press and hold the reset button on the side panel of your extender for a couple of seconds.
  • Once you see that the power LED lights on your device started blinking, release the button and after sometime connect via WiFi to your wireless range extender.
  • Log in to the web user interface of the smart wireless repeater using mywifiext.ney.
  • Now, you will be prompted to enter login credentials (default username and password).
  • Onto the displayed page you simply have to follow the setup wizard to set up your connection with the main router. It is also recommended – do not use WPS (WiFi-Protected Setup) when reconnecting to your existing router.
  • Finally, reconnect your networking (WiFi) devices to your Netgear extender.

What would be the Default Web Address for Setting up a Netgear Wireless Range Extender? is the local web address that is used for setting and configuring a brand new range extender.

Below are some light and smooth steps to configure a Netgear device with ease:

  • Firstly, power on your WiFi range extender.
  • Click on the new extender setup button and navigate to login page.
  • Here, you will be asked to enter a default username and password.
  • As soon as you enter the credentials Netgear Genie home-page will be displayed.

For further and instant assistant ask our technical department for Netgear extender support.

If you want to install your Netgear wireless range extender as an access point mode, then:

  • First of all, power on your wireless range extender and after that, connect it with your existing networking router through an Ethernet cable.
  • Next, what you have to do is to grab a tablet or a smartphone and connect to the range extender network.
  • Open an internet browser that should be relevant (appropriate) and up-to-date and go to mywifiext setup page. For this, you have to type into the address bar field.

Note: To get rid of annoying error messages, ask us for support.

  • Select the new extender setup option.
  • Genie Setup page will open that will ask you about the mode in which you desire to set up your Netgear device.
  • Now, select the network type from the available options such as private, home network, public, etc. and set up new, safe, and secure login details for the network.

Finally, you are all set to use the range extender as an access point. So, if you find any trouble or issue while setting up the range extender as an AP mode, feel free to take help from highly-experienced professionals via comment section below. They will also help you to set up your device through Netgear WiFi range extender manual.